2013 FANUC Robodrill D21SiA5

 Drill/Tap center FANUC Robodrill D21SiA5 2013

1700 working hours with a fast spindle of 24,000RPM.

Suitable for prototype and serial production.

It is the best-selling CNC milling machine in history, quite possibly the most sophisticated milling machine with a long history of development and production of this machine since 1972).

STATE:

Year: 2013. Installed 2015/08. The machine originates from a German aluminum foundry from Brandis that went bankrupt. It machined short cycles - drilling, milling of castings (can be deduced from the number of cycles and operating hours and chips).

Fully functional. Most probably not crashed. Condition very good to excellent.

Machine is under power, I'll show you on teleconference or personally in Prague. 1700 hours of machine time.

The machine was seen by a service technician from the Czech FANUC and said that the spindle was fine and so was the machine.

The machine is owned by a Czech ALU injection mould maker Suchomel PLASTY

SPINDLE: 24,000 RPM / High Power / High Torque / Cone Big Plus BBT30 / CTS (cooling in the center of the spindle 20bar) / 35 Nm, 26 kW (1 min), 4.5 kW continuous operation

KINEMATICS: X300 Y300 (+100 off the table) Z330 (column increased by 100 mm for 4th and 5th axis, travel 250-580mm in the Z axis from the table) 54m / min 1.5G in Y is a machine

TABLE: 630x330

Positioning accuracy according to datasheet ISO 230-2 0.006 mm Repeatable accuracy ISO 230-2 +/- 0.002 mm

Accuracy not verified, I do not anticipate any problem and will fully demonstrate.

Spindle center cooling 20bar @ 10 l / min / 3,0kW, 300l Coolant, chip ejector left https://www.nop-germany.com/en/881-2/standart_en/

RS 232 slot, Ethernet connected and programs can be uploaded via Ethernet (FANUC application included) directly from PC.

Software support on 4.-5. axis included. It is necessary to add servo drivers and the 4th and 5th axis itself

Automatic side door right for robot, transformer 230>200V, set of manuals, basic top cover.

20 tool holders included (drilling, milling, some with internal bore for inner cooling)

14kVA SCCR 1.5kA 2050kg 150 l / min, 0.35-0.55 MPa

Extra standard OPTIONS included:

- automatic oil lubrication (ISO VG 68 - Mobil Vactra)

- automatic side door right

- chip ejector with a high pressure pump of 20 bar.

- HC100 raised Z column

OPTIONS: on request:

- Possibility of delivery of the Staubli RX60BL robot driven 100 hours including connection to the machane and implementation

Find more here - https://www.ucymachines.com/