Coating plant
Coating plant
Munich, Germany
Description
Coating plant
General information old plant:
Dimensions of components:
Length: approx. 2,200mm
width: approx. 600mm
Height: approx. 1.100mm
Power supply:
Operating voltage: 380 V- three-phase current
frequency: 50 Hz
Star-delta connection: from 5,1 kW
Heating energy:
Ovens / dryers: natural gas
VBH: hot water 80/70°C
Or gas / electricity
Compressed air:
Ovens / dryers: approx. 6 bar
Condition at transfer point: free of oil and water with
Maintenance unit
Fresh water:
Pressure at transfer point: min. 4 bar
Temperature at transfer point: approx. 8-15 °C
Pretreatment chamber:
Degreasing:
Degreasing: approx. 2 min
Drip-off time: approx. 2 min
Treatment temperature: approx. 65 °C
Spray pressure: approx. 1.5 bar
Nozzle capacity: approx. 16-20 liters/min
Installed heating capacity: approx. 100 kW
Rinsing:
Rinsing: approx. 2 min
Drip-off time: approx. 2 min
Treatment temperature: RT
Spray pressure: approx. 1.5 bar
Nozzle capacity: approx. 16-20 liters/min
Raw water rinsing/ fogging nozzles:
Rinsing: approx. 0.5 min
Drip-off time: approx. 2 min
Treatment temperature: RT
Adhesive water dryer:
Length: approx. 3300 mm
width: approx. 2300 mm
Height: approx. 2800 mm
Drying method: convective with hot air
Medium: natural gas
Heating mode: direct heating
convection temperature: 50 - 160 °C, adjustable
Installed heating capacity: approx. 75 kW
Powder baking oven:
Length: approx. 4200 mm
width: approx. 3500 mm
Height: approx. 3500 mm
Drying method: convective with hot air
Medium: natural gas
Heating mode: direct heating
convection temperature: 50 - 240 °C, adjustable
Installed heating capacity: approx. 120 kW
Old plant consisting of:
1 1-chamber cycle pre-treatment
1 adhesive water dryer
1 powder incinerator
1 steel structure for manual conveying
1 manual conveying system
Find more here - https://www.ucymachines.com/
Specifications
Manufacturer | Coating plant |
Condition | Used |