1999 Heiche Powder Coating Line

Manufacturer: Heiche

Model: HEIS02

Machine type: Powder coating line

Year of manufacture: 1999 / 2013 (conversion)

Status: Operational / Ready for use

Technical Specifications

• Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m
• Maximum workpiece window: 1,150 x 880 x 350 mm
• Maximum load per metre: 60 kg on 2 brackets
• Compatible materials: Steel, aluminium, stainless steel, zinc die-cast
• Coating thickness: 40 - 200 microns
• Conveyor speed / throughput: 0.3 - 3.0 m/min
• Noise level: less than 85 dB(A)
• Control system: Siemens S7-1500
• Operating software: ICOM (upgraded 2024)
• Operating modes: Manual and automatic
• Conveyor system: Chain conveyor
• Number of pre-treatment baths: 8
• Automatic powder coating booth: 1
• Manual powder coating booth: 1
• Drying: Adhesive water dryer + curing oven
• Loading / unloading: Manual along the chain conveyor

Utilities and Connections

• Electrical supply: 3-phase 230/400 V, 50 Hz
• Control voltage: 24 V DC
• Total electrical power: 80 kW
• Fuse - automatic powder line: 125 A
• Fuse - pre-treatment + ring conveyor: 63 A
• Compressed air operating pressure: 7.5 bar
• Mains water consumption: 100 l/h
• Demineralised water (VE) pressure: 2.5 bar, consumption 600 l/h
• Hot water (PWW): 1.5 bar, flow temperature 85 degrees C, capacity 30 kW
• Gas connection capacity: 490 kW
• Exhaust air: Return via exhaust fan flange (pressure side)
• Powder feed: Dosing system from a hopper
• Waste water: Returned via ball valve

Pre-treatment Bath Register (8 Baths)

• Bath 1: Spray depassivation / neutral pickling / iron phosphating - 2.5 m3 - Stainless V4A -
• Gas burner with heat exchanger
• Bath 2: Spray rinse (mains water) - 1.0 m3 - Stainless V4A
• Bath 3: VE spray rinse I - 1.0 m3 - Stainless V4A
• Bath 4: VE spray rinse II - 0.7 m3 - Stainless V4A
• Bath 5: Titan spray passivation - 0.7 m3 - Stainless V4A - Hot water heating
• Bath 6: CR(III) spray passivation - 0.96 m3 - Plastic - Hot water heating
• Bath 7: VE spray rinse - 0.5 m3 - Plastic
• Bath 8: VE spray rinse - 0.5 m3 - Plastic

Drying and Curing Ovens

• Adhesive water dryer - Manufacturer: Hugo Brennstuhl
• Model: Haftwassertrockner - Year: 1999
• Max. drying temperature: 190 degrees C
• Thermal output: 154 kW
• Heating medium: Natural gas
• Curing oven - Manufacturer: Hugo Brennstuhl GmbH & Co. KG
• Model: Einbrennofen - Year: 1999
• Max. curing temperature: 240 degrees C
• Thermal output: 160 kW
• Heating medium: Natural gas

Automatic Powder Coating Booth

• Manufacturer: J. Wagner
• Model: PrimaCube Powder Kabine 12000 with 1 manual operator platform
• Year: 2013
• Powder recovery: Mono-cyclone / filter 12000
• Conveying: Plug conveyor with control
• Pipework: Booth to cyclone and cyclone to after-filter return
• Control: Booth control panel (without application system)
• Extras: Additional roof for manual operator including lighting, comfort powder centre with
• fresh powder supply
• Automatic spray guns: 13
• Manual spray guns: 1

Manual Powder Coating Booth

• Manufacturer: J. Wagner
• Model: Handkabine Basic 4000 + SPRINT Airfluid XE unit for carton powder coating
• Year: 2013
• Input power: 3.0 kW

Scope of Supply

• Chain conveyor with 498 hooks
• 8 pre-treatment baths (as listed above)
• Adhesive water dryer
• Curing oven
• 1 automatic powder coating booth (Wagner PrimaCube 12000)
• 1 manual powder coating booth (Wagner Basic 4000

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com