2020 AXA VHC 3 3000 XTS
2020 AXA VHC 3 3000 XTS
Dresden, Germany
Description
AXA moving column machining center, model VHC 3-3000 XTS
VHC 3 -XTS X=3000 , Y = 700 , Z = 850 (mm)
Standard equipment
Working area
X-stroke vertical according to the X-travel of the selected machine
X-stroke horizontal X-stroke vertical - 2 x 210 mm
Y-stroke vertical 700 mm
Y-stroke horizontal 700 mm
Z-stroke vertical 850 mm
Z-stroke horizontal 850 mm
Distance vertical table - spindle nose: 40 - 890 mm
Distance horizontal table - spindle nose: 250 -1100 mm
Swivel head
Swivel head 1-axis swivel head infinitely variable positioning in angular steps
of 0.001°. Hydraulically clamped during machining.
Swivel movement via B-axis
Version size A
Swivel range B-axis: +/-90
Pitch 0.001
Swivel radius pivot point - spindle nose: 210 mm
Measuring system Direct measuring system, accuracy +/-5".
Machine table according to the currently valid standard dimension sheet of the working area
T-slots 14 mm H9, alignment slot H7
T-slot distance 160 mm
Number of T-slots 5
Table load max. 1200kg/m² with even and flat load of the tables
Tool changer
Type XTS Lateral chain magazine, outside the working area.
Tool change behind the working area cover. Thereby
Unrestricted use of the working area during machining and
and protected tool magazine from dirt and chips.
chips. Magazine can be loaded during machining.
Tool holder SK 40, DIN ISO 7388-1 AD/DIN ISO 7388-3 AD (DIN 69871 A/DIN
69872 A)
Tool places 22
Tool width max. diameter 85 mm
With free neighboring places max. diameter 135 mm
Tool length max. 400 mm
Tool weight max. 8 kg per tool
Weight in overgripper max. 10 kg
Spindle and drives
Feed force X/Y/Z max. 9000 N
Rapid traverse X/Y/Z 40/40/30 m/min
Main spindle AC hollow shaft motor, drive no. 110
Power max. 30 kW at 40% ED
Torque max. 143 Nm at 40% ED
Speed range up to max. 6000 1/min. optionally extendable up to max. 12000 1/min.
Buckling speed 2000 1/min
Balancing quality min. G 6,3 mmm/s for tool holders and tools! For
10000 1/min, tool holders and tools with a balancing quality of
with a balancing quality G of 2.5 mm/s are required.
Accuracy
Principle All specifications regarding accuracy only if constant ambient and
ambient and operating conditions. Direct sunlight,
heat accumulation, heating by external energy sources, drafts or vibrations will
vibration affect the accuracy. All data only in
unloaded condition of the machine and after the AXA
Warm-up program
Test protocol Accuracy data only with reference to the AXA
test protocol and only with technologically reasonable and possible
feed. Positioning accuracy with vertical spindle position per 1000
mm per axis X, Y and Z.
Repeating/positioning accuracy +/-0.005 mm
Further equipment
Control Siemens 840 D sl with 19" TFT display
Guiding system Hardened precision steel guides in the basic axes x/Y/Z mounted on a
hand scraped or ground base.
Mating guides with Turcite coating. Thereby high life
excellent long-term accuracy and optimum damping properties.
damping properties .
Traversing column/headstock Cross slide, traversing column and headstock are made from
high-quality machine castings
Cladding Closed work area cladding with vertically positioned
bellows cover with sheet metal lamellas. Above the work area
opening, manually operated sliding doors. Electrically protected and
locked
Connection sleeve Preparation for connection sleeve with 200 mm diameter for a customer's
suction system provided by the customer. A cover plate is fitted as standard
installed as standard
Coolant system Coolant system only in connection with chip conveyor and
an external coolant tank
Measuring system Direct, encapsulated length measuring system in the basic axes X/Y/Z.
Manufacturer Heidenhain
Data interfaces USB and RJ45 Ethernet interface.
Main connection 3 x 400 V / 230 V / N/PE 50 Hz
Control voltage 24 V DC
Compressed air connection Min. 6 bar to max. 10 bar oil-free, dry and clean compressed air
Travel Pendulum operation with partition wall and safety circuit for
side detection
Y-stroke 900 mm and Z-stroke 950 mm. For X-stroke up to 3000 mm. Incl.
900 mm wide machine tables
Tool magazine Extension of the magazine chain from 22 to 36 SK 40 tool places.
Accuracy Increased accuracy for X, Y, and Z axis with vertical spindle.
Positioning accuracy +/- 0.0075 mm per 1000 mm and per axis.
Incl. temperature compensation of the heating by the main spindle
in Y and Z axis and recooling system for central cooling of
spindle motor and control cabinet
Main spindle AC hollow shaft motor, drive no. 113. max.power 40 kW (40%
ED), max. torque 255 Nm (40%ED), articulation speed 1500 1/min.
Speed range up to 6000 1/min. Optionally extendable up to max. 12000
1/min.
Speed range Increased speed range up to 10000 1/min.
Coolant system Coolant system for the machining process. Internal
Coolant supply through the spindle. Coolant pressure up to 50 bar
and volume flow up to 30 l/min. Incl. external 400 l tank with
paper filter system. Filtering up to 50 mm. Only in connection with
Chip conveyor
Coolant system accessories Additional price for external coolant tank with 800 l. Recommended
from 50 bar coolant pressure or machines with X-stroke > 4000 mm
Coolant system accessories Two manual spray guns in the working area with steel sheathing of the
hose
Chip conveyor Hinged chip conveyor with torque cut-off as overload protection.
Discharge side right. Discharge height approx. 1200 mm. Incl. coolant tank and
pump for external coolant supply via a coolant ring with
adjustable coolant nozzles on the spindle. For X-stroke up to 3000 mm
Control Additional price for Heidenhain TNC 640 control with 19" TFT touch screen.
Control system Electronic handwheel HR 510 for Heidenhain control system
Measuring/control Renishaw RMP 60 touch probe with signal transmission by radio.
Receiver on the workspace paneling.
Measuring/controls Sealing air for the length measuring system in the basic axes X/Y/Z. For protection
against dust, dirt and liquids
Additional equipment
NC rotary table AXA RTA 2-300, face plate 300 mm. Indirect measuring system, accuracy
+/- 15" . Star-shaped T-slots. Horizontal/vertical design, center height
200 mm.
NC rotary table AXA RTA 4TF - 1000, face plate 1000 mm. Direct measuring system.
Accuracy +/- 5". Incl. rotary table cooling, star-shaped T-slots. Only for
horizontal extension. In positioning mode up to max. 20 1/min.
Rotary table accessories Manually operated tailstock MK 4. quill stroke 100 mm, center height 200
mm. Without tailstock tip.
Machine table T-slots in size 18 mm according to DIN 650. For X-stroke up to 3000 mm.
Coolant system Optional use of external cooling with compressed air or
cooling lubricant. Controlled by M-function.
Coolant system Optional use of internal cooling with compressed air or
cooling lubricant. Controlled via M-function.
Rotary table Accessories Rotary table RTA integrated in the working area. Same height as the machine table.
With straight connection of the machine tables to the rotary table. Information
about X/Y position of rotary tables in work area required.
Additional equipment for set-up plates. Required for setting up, aligning and
commissioning of the machine
Control mode 3 without enabling key gaccording to DIN EN 12417 part 1.1.6.4 for
Heidenhain or Siemens control
Control Opt. '167 OCM Optimized Contour Milling for Heidenhain Control
Counter reading as of 30.03.2023 4,320 hrs. , only one shift run
Year of manufacture of the machine 2020
Machine. Bound tools to the AXA machine
GARANT 5-axle clamp with many accessories
Veldon holders SK 40
d = 6 19 x
d = 8 10 x
d = 10 10 x
d = 12 11 x
d = 14 3 x
d = 16 11 x
d = 18 1 x
d = 20 11 x
d = 25 5 x
d = 32 1 x
Collets ER 16 52 x
ER 32 19 x
Drill chuck 3 x
Morse taper 6 x
Milling arbor 13 x
3 x vises
2 x measuring probes
Drills and milling cutters
Milling heads
Find more here - https://www.ucymachines.com/
Specifications
Manufacturer | AXA |
Model | VHC 3 3000 XTS |
Year | 2020 |
Condition | Used |