2006 Battenfeld HM 100 /5 25 S

Battenfeld HM100/525 S, year of construction 2006

Machine without conveyor and without hopper, handling only by agreement, but without protective fence.

Attention: Machine has a crack in the holding plate of the closing cylinder and loses oil,

this must be repaired before putting into operation.

Machine is disassembled in case of order, ex works, but not loaded, without packing.

Operating hours on 04.07.2022 = 45.838,51.

The machine is currently still connected,

Clamping force: 1000 kN

Mould board size (hxv): 680mm x 594mm

Distance between columns: 470 mm x 420 mm

Mould opening stroke: 500 mm

Mould height min.: 250 mm

Maximum clearance: 750 mm

Forward/reverse ejection force: 41.2 kN

Bolt diameter: 40 mm

Ls/d ratio: 22

Injection pressure: 2100 bar

Injection volume: 251 cm³

Injection weight , ps: 228,4 g

Stroke: 200 mm

Max. degree of plasticity: 30.4 g/sec.

Nozzle pressure: 86 kN

Installed heating capacity: 12,1 kW

Adjustable keg heating zones: 1+3

Total machine weight: 4.600 kg

Technical details

Hydraulic ejector stroke: 150 mm

Injection unit

Screw speed: 0 - 318 1/min

Electrical and hydraulic equipment

Pump power 18,5 kW

Oil 275 liters

Dimensions and weights

Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Find more here - https://www.ucymachines.com/