Ultrafiltration system in a 40ft container

Ultrafiltration system in a 40ft container.

Process specification

Raw water Groundwater, surface water, pre-treated waste water

Flow capacity 12 to 38 m³/h

Water temperature 2 to 35°C

pH 6,5 to 9,0

Membrane pore size 0,02 μm

Membrane module no 2 x 4

Membrane surface per module 60 m²

Membrane surface total 480 m²

Suspended solids inlet ca. 0,5 to 50; max. 100 mg/l

Suspended solids outlet < 0,5 mg/l

Maximum pressure in plant 5,0 bar

Main components

Pre-filter with automatic backwash

Flocculation with pH adjustment

Ultrafiltration

Backwash

Chemical enhanced backwash (CEB)

Dosing station for flocculation and pH adjustment

Dosing station for chemical enhanced backwash (CEB)

Compressed air system for integrity test and pneumatic drives

Optional component

Neutralisation (outside of the container)

Pipe and fittings

Water and waste water PP

Chemicals dosing station PP and PVC

Chemicals do dosing point EPDM hose with PVC protective pipe

Control panel

PLC System fabricate T-Box

Bus System Modbus

Operation and monitoring 15 inch touch panel

Remote control/monitoring

Container dimensions

Construction 40 feet standard sea container

Number of containers 1

Height x width x length 2.591 mm x 2.438 mm x 12.192 mm

Weight (without water) approx. 15.000 kg

Weight (in operation) approx. 25.000 kg

Possibility for transport, loading and moving the container

 By using crane and wire or steel chain over 4 pieces upper ISO-edges.

 By using crane and wire or steel chain over 4 pieces lower ISO-edges.

 Pockets for forklift truck are not foreseen on the container.

Please apply the instruction manual of the container manufacturer for transport, loading and moving the container, as well as during preparation of the ground and storing position of the container.

Medium connections

The container has several windows, which are equipped with cover and screw. Through these windows the pipes for the mediums and cables for the electrical power are connected with the container.

Medium connections Flange EN 1092-1/10/DIN 2576 PN 10

Raw water 2 x DN 80

Waste water 2 x DN 125

Filtrate 1 x DN 125

Drain 1 x DN 125; 1 x DN 80

Electrical power supply

Main electrical power supply for the container would be connected to the control panel, which distributes the electricity to the electrical consumers within the plant. The connection of the main cable from the voltage supply source to the control panel must be done by special qualified electrician.

Required cable cross section 25 mm²

Required safety fuse (on site) 63 A

Voltage supply three-phase current 400 V

Optional equipments outside of the container

Following equipment is to be placed outside of the container and must be transported separately.

Neutralisation tank with agitator

Diameter 2300 mm

Height 2470 mm

Useful volume 5 m³

Agitator rated power 1,5 kW

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com