2006 Variovac Rotarius VP 024

2006 Variovac Rotarius VP 024

Manufacturer: Variovac

Type: Rotarius VP 024 (semi-automatic tray sealer with turntable)

Year of construction: 2006

Equipment: 2 sealing units, complete machine documentation including circuit diagrams, replacement cartridges and rubbers for the sealing units plus packaging material, 5 rolls of sealing film of 500 m each and 5 boxes of 450 pieces of sealing trays

The machine is fully functional (in use until February 2024 and last technical inspection in week 16/2024).

Semi-automatic tray sealing machine

with vacuum and protective gas device

max. shell size J3enmaJ3

max. shell depth

Application 1

Application 2

Application 3

Application4

MACHINE CONSTRUCTION

300x400 mm

100mm

just sealing

Evacuate and seal

Gas cleaning and sealing

Evacuate, fumigation and sealing

- Compactbauweise in V 2A Kastenrohr-

Welded construction

- The entire machine is for NaJ3 operation

designed and can be sprayed with water or

be cleaned with a steam jet. There will only be

corrosion-resistant materials used.

The protection class corresponds to IP 65.

Manual rotary table, swivels through 360 degrees

Recording of two pieces of shell recordings

Vacuum and gassing system

- high performance vacuum pump,

Suction power 63 cbm/h, installed

- electronic contact vacuum gauge for

Pressure-dependent vacuum and gas control

- Time control for vacuum and gas follow-up time

- Puffe retains

- Pressure control valve

Foil removal device

- automatic. Film transport, electrically driven

- max. film roll diameter 250 mm

- Rewinding of residual film, electrically driven

Tire

- Party

- Compressed air requirement: 28 l/cycle. at 6 bar

Electrical equipment

- Touch-Screen Monitor Siemens SPS S7

- 8 machine programs can be saved

- ElektroanschluJ3: 3L/N/PE, 400V /50Hz, max. 7 KW

lli - safety device

- when fumigation with more than 20% oxygen

- cannot be used with oxygen flushing

Total price of the basic machine (without tools)

TOOL EQUIPMENT

Tool 1 or 2 use

- Upper sealing part with constantly heated sealing plate

and built-in contour cutting

- 2 stick shell holders

- e.g. in 2-fold use: max. bowl size 13e: 190 x 300

or 400 x 140 mm

Tool 4 or 6 uses

- Sealing upper part with constantly heated sealing plate

and built-in contour cutting

- 2 Stilck shell holders

e.g. in 4-fold use: max. bowl size 13e: 190 x 140 mm

Shipping packaging in a crate (standard)

- necessary type of packaging for safe transport

Option

Photoelectric print mark control

Performance: sealing only

Evacuate and seal

Evacuate, fumigation and sealing

about. 6 beats/min.

about. 4 beats/min.

about. 3 - 4 beats/min.

The performance depends on the product to be packaged, the product temperature and the vacuum conditions

Gasparametem.

Machine

Foil 2.500 m

Bowls 2,250 pieces

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com