SHANTUI LE60, E-Wheel loader/E-Radlader - fully electric, 20ton

The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times totaling 9.5 seconds. For maneuverability, it features dimensions of 8,930 mm in length, 3,030 mm in width, and 3,440 mm in height, with a wheelbase of 3,400 mm. The minimized turning radius enhances maneuverability in tight spaces. Safety and efficiency are further ensured with its fully hydraulic service brake and drum-type parking brake system. This makes the SHANTUI LE60 a practical and power-efficient choice for high-volume load and carry applications.

Technical Specifications

Battery & Powertrain

  Battery capacity 357 kWh  Battery type Lithium-ion, IP68, liquid-cooled  Nominal voltage / capacity 537.6 V / 664 Ah  Charging time 20–95% approx. 1.25 hours (at 240 kW)  Recommended charging station power 120 / 240 / 300 kW  Battery runtime 6–10 hours  

Electric Motors

  Drive motor 100 kW (max. 200 kW), 1,200–2,400 Nm, IP67  Work motor 80 kW (max. 160 kW), 400–800 Nm, IP67  Transmission Electronically controlled fixed-shaft transmission, F2/R2  Axles Self-locking differential, gear ratio 20.86; tires 23.5-25-20PR  Speed 13.5 / 38 km/h (gear 1/2)  

Performance & Hydraulics

  Rated load capacity 6,000 kg  Max. breakout force 185 kN  Max. pulling force 160 kN  Hydraulics – Flow rate 112 l/min (dual-pump combination)  Cycle times ≤ 5.5 s / ≤ 1.0 s / ≤ 3.0 s (total ≤ 9.5 s)  Braking system Fully hydraulic service brake; drum parking brake  

Dimensions

  Length × Width × Height 8,930 × 3,030 × 3,440 mm  Wheelbase / Track width 3,400 mm / 2,250 mm  Min. Ground clearance 440 mm  Turning radius (tire center) 6,535 mm  Clearance radius 7,640 mm  Steering angle / Approach angle 35° / 27°