2007 Used Gema Powder Coating Booth with Quick Color Change and 2 x 4 Guns, Fully Functional

MANUFACTURER: Gema

YEAR OF MANUFACTURE: 2007.

MACHINE: Automatic powder coating booth with quick color change (multi-color), complete with application unit, control, mono-cyclone recovery and after-filter.

CONDITION: Used, fully functional (as inspected). In operation since 2007, mainly in two-shift operation.

THE SYSTEM INCLUDES:

1. MAGICPLUS LBK QUICK COLOR CHANGE BOOTH. Plastic booth in sandwich construction for automatic and manual coating. Inside dimensions 2,000 x 1,800 x 2,300 mm (L x W x H), outside dimensions 4,400 x 2,080 x 3,700 mm. Entrance and exit openings 2,150 mm high x 900 mm wide. Two part locks with manual coating stations (at entrance and exit). Conical plastic lower section with automatic swivel flaps, built-in lighting, cleaning lances and hanger cleaning with 2 blow nozzles. Stairs included.

2. APPLICATION UNIT. 8 automatic powder guns in 2 x 4 arrangement, vertically opposite each other, mounted on 2 lifting units ZA04-18 with 1,800 mm stroke and speed of 0.08 to 0.60 m/s. 2 traverse axes XT09-10 with 1,000 mm travel for automatic width adjustment. Position accuracy better than 5 mm. 8 gun blow-off units for external gun cleaning.

3. CONTROL. ITW Gema MagicControl CM10 process control with 12 inch colour touch screen, CAN bus, automatic, manual, cleaning and service modes, and operating hours recording for guns, axes and booth.

4. MULTI-COLOR POWDER RECOVERY. Mono-cyclone with 12,000 Nm3/h exhaust air, swivelling sieve machine with 600 micron sieve, and powder transfer to the powder center.

5. AFTER-FILTER. 12,000 Nm3/h, filter cartridges with automatic cleaning, waste powder container, pressure monitoring, fan motor 22 kVA. Noise level below 80 dB(A), with sound hood approximately 77 dB(A).

COLOR CHANGE TIMES (according to the manufacturer's specification, one operator): 5 to 8 minutes with powder loss, 10 to 15 minutes with powder recovery.

DESIGNED FOR: Workpieces up to 1,500 mm high and 800 mm wide. Conveyor speed 0.8 to 2.8 m/min. Cycle time 4.5 minutes per hanger.

SYSTEM DATA: 3 x 400 V + N + PE, 50 Hz, maximum power consumption 32 kVA, protection class IP 54. Compressed air 6 to 10 bar, maximum 200 Nm3/h.

SPARE PARTS: Spare parts that were available at the time of shutdown can be provided.

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com