2005 Homag PROFI FR 20/17/45/S Edge Banding Line
2005 Homag PROFI FR 20/17/45/S Edge Banding Line
Contact us for price
Location:Spain
Description
Specifications
| Manufacturer | Homag |
| Model | PROFI FR 20/17/45/S |
| Year | 2005 |
| Condition | Used |
| Stock Number | 758653 |
| Type of Machine | Edge banding line for panels: feed portal, two profiling units (edge-banders), gluing station, discharge stacking portal |
| Incisor Speed | 6000 rpm |
| Incisor Power | 1.5 kW |
| Incisor Board Thickness Range | 8-60 mm |
| Incisor Tool Overhang | 10-120 mm |
| Incisor Bore Diameter | 30 mm |
| Incisor Max Tool Diameter | 180 mm |
| Trimmer Speed | 6000 rpm |
| Trimmer Power | 4.5 kW |
| Trimmer Board Thickness Range | 8-60 mm |
| Trimmer Tool Overhang | 10-120 mm |
| Trimmer Bore Diameter | 35 mm |
| Trimmer Max Tool Diameter | 250 mm |
| Router Unit Speed | 6000 rpm |
| Router Unit Power | 4.5 kW |
| Router Unit Board Thickness Range | 8-90 mm |
| Router Unit Tool Overhang | 10-120 mm |
| Router Unit Tool Diameter | 250 mm |
| End-Trim Unit Power | 0.18-0.4 kW (depending on model) |
| End-Trim Unit Max Feed Rate | 28 m/min |
| End-Trim Unit Piece Thickness | 60 mm |
| End-Trim Unit Edge Thickness | 6-20 mm (depending on model) |
| End-Trim Unit Edge Cross-Section | 270-900 mm2 |
| End-Trim Unit Piece Overhang on Chain | 30-110 mm |
| End-Trim Unit Gap Between Pieces | 350 mm |
| End-Trim Unit Next-Piece Distance | 700 mm |
| Feed Chain Drive Power | 3-11 kW |
| Feed Chain Speed | 10-40 m/min |
| Loading Portal Type Designation | Bargstedt O TBP220/ERG/41/20/1 |
| Loading Portal Voltage | 400 V, 50 Hz, 3~N |
| Loading Portal Power | 20 kW |
| Loading Portal Current | 100 A |
| Loading Portal Control Voltage | 24 V |
| Cleaning System | Wandres micro-cleaning unit |