1998 Used Z38 Cross-Cutting System
1998 Used Z38 Cross-Cutting System
Contact us for price
Location:Cologne, Germany
Available quantity:1
Specifications
| Model | Z38 |
| Year | 1998 |
| Condition | Used |
| Stock Number | 759352 |
| Year of Manufacture | 1998 |
| Eccentric Shear | Not included |
| Package Turner | Optional |
| Processable Materials | Z, ZMg, ZA, AZ, FAL, EZ, Platal, Pladur, Bondal; strictly unoiled |
| Strip Thickness Min. / Max. | 0.30 / 3.00 mm |
| Input Width Min. / Max. | 430 / 1,680 mm |
| Output Width Min. / Max. | 430 / 1,680 mm |
| Length Tolerance | ±0.25 mm up to 2,000 mm; ±0.50 mm up to 4,000 mm; ±0.75 mm up to 6,000 mm |
| Sheet Width / Length | Width 430-480 mm: length 500-2,000 mm; width 481-1,680 mm: length 500-6,000 mm |
| Max. Input Coil Weight | 20 t |
| Max. Output Weight | 5 t |
| Coil Inner Diameter | 508 / 610 mm |
| Coil Outer Diameter | max. 2,100 mm (uncoiling from both sides) |
| Stack Height Package + Pallet | 500 + 200 mm |
| Tilting / Turning Unit | 5 t, max. length 4,000 mm |
| Weighing Range | 6.5 t |
| Tensile Strength Min. / Max. | 200 / 600 N/mm² |
| Yield Strength Min. / Max. | 120 / 480 N/mm² |
| Flatness Edge-Centre-Edge (DIN 1541 / EN 10131) | min. 2-1-2 mm; max. 4-2-4 mm |
| Protective Film Removal | Not possible |
| Film Application | Flush with edge 0/-5 mm per edge; free edge ±5 mm |
| Oiling (Both Sides) | Not possible |
| Stamping | Out of service |
| Features | Continuous length measurement, film lamination, levelling unit, turning unit |
| Leveller Manufacturer | Schnutz |
| Levelling Cassettes | 2 for galvanized material, 2 for coated material |
| Levelling Rolls Top / Bottom | 10 / 11 |
| Backup Rolls Top / Bottom | 90 / 90 |
| Leveller Strip Thickness Ranges | 0.30-1.5 mm; 1.5-3.0 mm |
| Line Speed (Leveller) | 100 m/min |
| Max. Yield Strength (Leveller) | 300 MPa |
| Film Max. Roll Diameter | 450 mm |
| Film Max. Running Length | 2,000 m |
| Film Tolerance Full Surface | +0 / -5 mm |
| Film-Free Edge | +5 / -5 mm |
| Max. Line Speed (Lamination) | 50 m |
| Stacking Stations | 3 (stations 1-2 for sheets up to 3,500 mm, station 3 up to 6,000 mm) |
| Package Turning Angle | 180° |
| Max. Package Height When Turning | 600 mm |
| Strapping Bands per Pallet | 3-5 |
| Shuttle Stack Positions | 2 |
| Max. Package Height (Shuttle) | 2,500 mm |