KOKI TEC ULTIMA Benchtop Selective Soldering System

Manufacturer: KOKI TEC

Series: ULTIMA (TakuROBO Benchtop Type)

CE Mark: Registered on all three units

System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS

Suitable for: Prototype to small and medium volume PCB production

ULTIMA-TRZ Selective Soldering Machine

• Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm
• Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H) mm
• Body dimensions: W620 x L940 x H442 mm
• Minimum PCB size: 50 (W) x 50 (L) mm
• Maximum PCB size: 250 (W) x 330 (L) mm
• PCB thickness: 0.8 to 2.0 mm
• Machine weight: approx. 120 kg
• Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA
• Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25 L/min
• Solder pot capacity: approx. 16 kg (specific gravity 7.3)
• Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner diameter, including Aerojet
• nozzle
• Standard nozzles available: diameter 2.5, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 20 mm
• Superfine nozzles available: diameter 2, 2.5, 3, 4 mm
• Jet wave accuracy: plus/minus 0.3 mm or less
• Normal solder temperature: 230 to 330 degrees C
• Nitrogen heating temperature: 350 degrees C plus/minus 10 percent
• Moving part: PCB table (X-Y-Z axes)
• Soldering modes: Line mode and Point model

ULTIMA-SPZ Spray Fluxer

• Dimensions (without signal tower): 630 (L) x 912 (W) x 390 (H) mm
• Outer dimensions (with signal tower): 630 (L) x 912 (W) x 862 (H) mm
• Body dimensions: W630 x L910 x H390 mm
• Minimum PCB size: 50 (W) x 50 (L) mm
• Maximum PCB size: 250 (W) x 330 (L) mm
• PCB thickness: 0.8 to 2.0 mm
• Machine weight: approx. 60 kg
• Power source: single-phase AC 100 to 240V plus/minus 10 percent, 0.2 kVA
• Air supply: 0.4 to 0.5 MPa
• Flux tank capacity: 0.3 to 0.4 litres
• Fluxer type: Two-fluid Aerojet nozzle
• Moving part: Spray gun (X-Y axes)

ULTIMA-PHS Preheating Machine

• Dimensions (without signal tower): 690 (L) x 602 (W) x 682 (H) mm
• Outer dimensions (with signal tower): 690 (L) x 602 (W) x 901 (H) mm
• Body dimensions: W600 x L602 x H682 mm
• Minimum PCB size: 50 (W) x 50 (L) mm
• Maximum PCB size: 250 (W) x 330 (L) mm
• PCB thickness: 0.8 to 2.0 mm
• Machine weight: approx. 45 kg
• Power source: single-phase AC 200V plus/minus 10 percent, 2.4 kVA
• Temperature setting range: 0 to 400 degrees C

Key Features

• Stable soldering quality replacing manual hand soldering
• Small footprint — suitable for cell production environments
• Available from prototype production through to small and medium volume runs
• Aero jet nozzle for precise and clean flux application
• N2 nitrogen heating for anti-oxidation of solder and land, and improved solder fluidity
• Diagonal PCB lift movement prevents solder bridge generation
• Up to 3 solder pots can be added to increase production volume
• Energy-saving and carbon-neutral compatible design
• Applicable to heavy soldering with special nozzles
• Productivity advantage over manual soldering: 1,500 pcs/day vs 1,300 pcs/day manual
• Operator reduction: 2 persons vs 6 persons manual
• Significant solder material savings: 4 kg vs 18 kg per day manual

Available Options

• Program creation system Freedom (separate PC required)
• Data creation supporting software (scanner and Gerber data NC creation)
• Production log management application
• Parts library management application
• Application for multi-communication (up to 3 TRZ units and 1 SPZ)
• Barcode and QR code automatic PCB model switching application
• Three-light signal tower
• Solder shortage alarm
• Weekly timer for automated machine startup
• Superfine nozzles
• Laser-type wave height detection and feedback control
• Sensors for solder overheat and N2 overheat
• PCB detection and error-proof functions
• PCB presence sensor
• Flux flowmeter
• Robot I/O
• Aluminium frame stand
• Adaptive voltage and step-down transformer
• Automatic solder feeder (diameter 2 mm solder wire, 1 kg bobbin)
• Safety cover with exhaust duct (open type, open/close type, or with area sensor)
• Board size expansion option: X axis extended from 330 mm to 400 mm
• Soldering verification camera with LED lighting
• Centre bar anti-warp mechanism

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com